CCNA
cyber security, Networking

CCNA

Apply to Course Now
Review
10
CCNA Training Institute for CCNA global Certification in Patna, Bihar, India. Learn CCNA routing & Switching from expert in Network Administrations. Cisco .
10

Cisco Training and Certification

CCNA Course | CCNA Training Institute | CCNA Certification

CCNA (Cisco Certified Network Associate) Course is an IT certification.

Cisco Systems, Inc. is an American multinational technology company headquartered in San Jose, California, that designs, manufactures, and sells networking equipment.Cisco Systems also sponsors a line of IT Professional certifications for Cisco products.

 

GenCor follows Cisco course curriculum for CCNA Training & Certification.

Eligibility:-BE/B Tech/Diploma/Any Graduate

Course Duration:60 Hrs./6 Weeks/1.5 Months

Certification:-Gencor is Pearson VUE authorized Center for Cisco Global Certification.

 

About CCNA Certifications:

CCNA is a popular certification in computer networking. Cisco created the CCNA to recognize basic competency in installation and support of medium-sized networks. Computer-related positions, such as computer support specialists, can benefit from obtaining the Cisco Certified Network Associate (CCNA) credential. For network engineers who need to increase their value to employers and stay current with advances in networking knowledge and skills, the Cisco CCNA Routing and Switching program provides the education and training required for installing, monitoring, and troubleshooting network infrastructure products designed by the industry leader in IP networking.

CCNA demonstrates competency in skills needed to build, maintain and troubleshoot the routing and switching of medium-sized networks.

The CCNA R&S covers installation, configuration, operation, and troubleshooting medium-size routed and switched networks, to make connections to remote sites via a WAN, and mitigate basic security threats,as well as IOS, IPv6, IPv4, OSPF, Cisco Licensing, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interfaces, Frame Relay interfaces VLANs, Ethernet, VLSM, and basic traffic filtering.

 

Syllabus:

CCNA 200-125 Covers:

Cisco Certified Network Associate (200-125)

Exam Description:

The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-125) is a 90-minute, 50–60 question assessment that is associated with the CCNA Routing and Switching certification. This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management.

The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

1.0 Network Fundamentals

1.1 Compare and contrast OSI and TCP/IP models
1.2 Compare and contrast TCP and UDP protocols
1.3 Describe the impact of infrastructure components in an enterprise network
1.3.a Firewalls
1.3.b Access points
1.3.c Wireless controllers
1.4 Describe the effects of cloud resources on enterprise network architecture
1.4.a Traffic path to internal and external cloud services
1.4.b Virtual services
1.4.c Basic virtual network infrastructure
1.5 Compare and contrast collapsed core and three-tier architectures
1.6 Compare and contrast network topologies
1.6.a Star
1.6.b Mesh
1.6.c Hybrid
1.7 Select the appropriate cabling type based on implementation requirements
1.8 Apply troubleshooting methodologies to resolve problems
1.8.a Perform and document fault isolation
1.8.b Resolve or escalate
1.8.c Verify and monitor resolution
1.9 Configure, verify, and troubleshoot IPv4 addressing and subnetting
1.10 Compare and contrast IPv4 address types

1.10.a Unicast
1.10.b Broadcast
1.10.c Multicast

1.11 Describe the need for private IPv4 addressing
1.12 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
1.13 Configure, verify, and troubleshoot IPv6 addressing
1.14 Configure and verify IPv6 Stateless Address Auto Configuration
1.15 Compare and contrast IPv6 address types
1.15.a Global unicast
1.15.b Unique local
1.15.c Link local
1.15.d Multicast
1.15.e Modified EUI 64
1.15.f Autoconfiguration
1.15.g Anycast

2.0 LAN Switching Technologies

2.1 Describe and verify switching concepts

2.1.a MAC learning and aging
2.1.b Frame switching
2.1.c Frame flooding
2.1.d MAC address table

2.2 Interpret Ethernet frame format
2.3 Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
2.4 Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches

2.4.a Access ports (data and voice)
2.4.b Default VLAN

2.5 Configure, verify, and troubleshoot interswitch connectivity

2.5.a Trunk ports
2.5.b Add and remove VLANs on a trunk
2.5.c DTP, VTP (v1&v2), and 802.1Q
2.5.d Native VLAN

2.6 Configure, verify, and troubleshoot STP protocols

2.6.a STP mode (PVST+ and RPVST+)
2.6.b STP root bridge selection

2.7 Configure, verify and troubleshoot STP related optional features

2.7.a PortFast
2.7.b BPDU guard

2.8 Configure and verify Layer 2 protocols

2.8.a Cisco Discovery Protocol
2.8.b LLDP

2.9 Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel

2.9.a Static
2.9.b PAGP
2.9.c LACP

2.10 Describe the benefits of switch stacking and chassis aggregation

3.0 Routing Technologies

3.1 Describe the routing concepts

3.1.a Packet handling along the path through a network
3.1.b Forwarding decision based on route lookup
3.1.c Frame rewrite

3.2 Interpret the components of a routing table

3.2.a Prefix
3.2.b Network mask
3.2.c Next hop
3.2.d Routing protocol code
3.2.e Administrative distance
3.2.f Metric
3.2.g Gateway of last resort

3.3 Describe how a routing table is populated by different routing information sources

3.3.a Admin distance

3.4 Configure, verify, and troubleshoot inter-VLAN routing

3.4.a Router on a stick
3.4.b SVI

3.5 Compare and contrast static routing and dynamic routing
3.6 Compare and contrast distance vector and link state routing protocols
3.7 Compare and contrast interior and exterior routing protocols
3.8 Configure, verify, and troubleshoot IPv4 and IPv6 static routing

3.8.a Default route
3.8.b Network route

3.8.c Host route
3.8.d Floating static

3.9 Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.10 Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.11 Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub)
3.12 Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub)
3.13 Configure, verify, and troubleshoot RIPv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution)
3.14 Troubleshoot basic Layer 3 end-to-end connectivity issues

4.0 WAN Technologies

4.1 Configure and verify PPP and MLPPP on WAN interfaces using local authentication
4.2 Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
4.3 Configure, verify, and troubleshoot GRE tunnel connectivity
4.4 Describe WAN topology options

4.4.a Point-to-point
4.4.b Hub and spoke
4.4.c Full mesh
4.4.d Single vs dual-homed

4.5 Describe WAN access connectivity options

4.5.a MPLS
4.5.b Metro Ethernet
4.5.c Broadband PPPoE
4.5.d Internet VPN (DMVPN, site-to-site VPN, client VPN)

4.6 Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
4.7 Describe basic QoS concepts

4.7.a Marking

4.7.b Device trust
4.7.c Prioritization

4.7.c. (i) Voice
4.7.c. (ii) Video
4.7.c. (iii) Data

4.7.d Shaping
4.7.e Policing
4.7.f Congestion management

5.0 Infrastructure Services

5.1 Describe DNS lookup operation
5.2 Troubleshoot client connectivity issues involving DNS
5.3 Configure and verify DHCP on a router (excluding static reservations)
5.3.a Server
5.3.b Relay
5.3.c Client
5.3.d TFTP, DNS, and gateway options
5.4 Troubleshoot client- and router-based DHCP connectivity issues
5.5 Configure, verify, and troubleshoot basic HSRP
5.5.a Priority
5.5.b Preemption
5.5.c Version
5.6 Configure, verify, and troubleshoot inside source NAT
5.6.a Static
5.6.b Pool
5.6.c PAT
5.7 Configure and verify NTP operating in a client/server mode

6.0 Infrastructure Security

6.1 Configure, verify, and troubleshoot port security

6.1.a Static
6.1.b Dynamic
6.1.c Sticky
6.1.d Max MAC addresses
6.1.e Violation actions
6.1.f Err-disable recovery

6.2 Describe common access layer threat mitigation techniques

6.2.a 802.1x
6.2.b DHCP snooping

6.2.c Nondefault native VLAN

6.3 Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering

6.3.a Standard
6.3.b Extended
6.3.c Named

6.4 Verify ACLs using the APIC-EM Path Trace ACL Analysis tool
6.5 Configure, verify, and troubleshoot basic device hardening

6.5.a Local authentication
6.5.b Secure password

6.5.c Access to device
6.5.c. (i) Source address
6.5.c. (ii) Telnet/SSH
6.5.d Login banner
6.6 Describe device security using AAA with TACACS+ and RADIUS

7.0 Infrastructure Management

7.1 Configure and verify device-monitoring protocols
7.1.a SNMPv2
7.1.b SNMPv3
7.1.c Syslog
7.2 Troubleshoot network connectivity issues using ICMP echo-based IP SLA
7.3 Configure and verify device management
7.3.a Backup and restore device configuration
7.3.b Using Cisco Discovery Protocol or LLDP for device discovery
7.3.c Licensing
7.3.d Logging
7.3.e Timezone
7.3.f Loopback
7.4 Configure and verify initial device configuration
7.5 Perform device maintenance
7.5.a Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
7.5.b Password recovery and configuration register
7.5.c File system management
7.6 Use Cisco IOS tools to troubleshoot and resolve problems
7.6.a Ping and traceroute with extended option
7.6.b Terminal monitor
7.6.c Log events
7.6.d Local SPAN

7.7 Describe network programmability in enterprise network architecture
7.7.a Function of a controller
7.7.b Separation of control plane and data plane
7.7.c Northbound and southbound APIs

Carrer in CCNA

CCNA training is first step toward a rewarding career as a network administrator or engineer.After the training, a candidate can : – install, configure, operate, and troubleshoot medium-size route and switched networks. – Implement and verify connections to remote sites in a WAN. – carry out essential networking jobs that are not limited to Maintenance and Network Troubleshooting only.

Job Profile/Job Title For CCNA Trained Candidates:

Network Administrator Cisco Network AssociateNetwork Engineer.

 

CCNA Global Certification | CCNA Course, Training and Institute Information

Contact Us Today

नाम - Your Name

ईपत्र पता - Email

मोबाइल नंबर - Mobile Number

कोर्स - Course

REQUEST CALL BACK

User Ratings

I am happy to be here in Gencor which provided me with technical professional and skillful aspects of auto cad, thank you.

User Ratings
Kush Prakash - West Bengal University of Technology

I completed CCNA traning and certification preparation before appearing for ccna global examination 200-120 from gencor.

User Ratings
Amit Kumar - Lovely Professional University

The trainer has good knowledge of the subject.

User Ratings
Saurabh Kumar Suman - Shaheed Bhagat Singh State Technical Campus, Ferozepur

This institute is the best institute in web designing. Trainer sir is good in knowledge and best trained and  provided web designing knowledge to me.

User Ratings
Abhishek Kumar - Guru Gobind Singh Polytechnic College, Talwandi Sabo, (Bhathinda) Punjab

The trainer is good, so I think everything is good. 

User Ratings
Rabindra Kumar Yadav - Samalkha Group of Institutions

The Gencor classes is good for getting the knowledge. The trainer has good communication with students. I completed CAD training in Mechanical from here.

User Ratings
Akash Kumar - Jawaharlal Nehru Technological University, Hyderabad

I gained a lot here in the Gencor and I believe that it will help to enhance my knowledge and personalty further in my life.

User Ratings
Prem Kumar - BIT Sindri

Institute Completed my training as per  Syllabus provided on time. 

User Ratings
Akshay Kumar - The Institution of Civil Engineers, Delhi

Gencor institute is the best institute which completed my course on Civil CAD on time.

User Ratings
Amit Kumar - Reg No - 001/15348 - Civil CAD

The overall system of teaching is favorable and good as I expected and helped a lot in increasing my knowledge.

User Ratings
Sunny Kumar

I appreciate the course by the institute and efforts put in to complete it within the prescribed time limits.

User Ratings
Mohammad Asad Eqbal

The trainer has good knowledge of autocad, so I am happy to complete the training of AutoCAD from here.

User Ratings
Hemant Raj - Reg No.: 001/15307 - Civil CAD

The Trainer is nice one. He teaches well. The institute is good. I have faith on the Institute.

User Ratings
Vikash Kr Mandal - Reg No.: 001/15308 - Mechanical CAD

The institute is very good one and object oriented, focused on setting  up career for engineering students. The trainer is having enough knowledge to guide students.Teaching method is very much appreciated and interactive.

User Ratings
Indranil Mazumdar - Reg No.: 001/15312 - Civil CAD

All class I did here was very good. Faculty provide every detail about syllabus & Course. I am thankful of you.

User Ratings
Sumank Saurav - Reg No.: 001/15321 - Mechanical CAD

Trainer is the best guide for autocad and institute is also best for autocad

User Ratings
Vikash Kumar Sharma - Reg No.: 001/15322 - Mechanical CAD

This is professional institute , It has given the full knowledge of the subject, It is best best providing knowledge.

User Ratings
Dinu Kumar - Reg No.: 001/15328 - AutoCAD ME

This institute given me knowledge about Autocad and I appreciate that . I must recommend other to learn CAD from here.  

User Ratings
Abhishek Kr Singh (Reg No . 001/15332)

I am Gracy Pradhan , completed my  Linux training on RHCE from GenCor. Training is fully practical based and full syllabus coverage prescribed RED Hat Inc. . This training is surely going to provide me help in placement by college.

User Ratings
Gracy Pradhan - Ram Krishna Dharmarth Foundation University

I completed my Autocad Civil Training with Project and certification from GenCor InfoEdge – India, Trainer is The best in providing training .

User Ratings
Sonu Kumar

Best Training for telecommunication on Cisco CCNA. I got placed in 3i infotech Patna.

User Ratings